EnergySystems
Send enquiry

TURBINE SERVICES / OVERHAUL

How we manage an overhaul

We manage overhauls of RB211-24G DLE gas generators and other gas turbines, from borescope inspection and the repair decision to restarting the unit at the station: repair-facility selection, acceptance, weekly reports in one format and testing.

Eight stages of an overhaul

  1. Inspection and repair decision

    Borescope inspection and review of operating data, vibration and maintenance history. We assess the condition and the risks of continued operation.

    Deliverable: a report with images and a recommendation: continue operation, repair on site or overhaul.

  2. Workscope by module

    We prepare a preliminary workscope for modules 01–05 from operating hours, manufacturer bulletins and client requirements, separating mandatory replacements from work that depends on inspection findings.

    Deliverable: preliminary workscope, budget and schedule.

  3. Selecting the repair facility

    We compare facilities on their qualification for the engine type, tooling and test bed, turnaround time, cost and logistics, and agree the choice with the client.

    Deliverable: a comparison of offers and a contract with the selected facility.

  4. Removal and transport

    Gas generator removal within the outage window, preservation, packing in a transport container, customs clearance and delivery to the repair facility.

    Deliverable: handover record, photos of condition and completeness, transport documents.

  5. Incoming inspection and teardown

    Incoming inspection at the facility, disassembly and inspection of modules and parts. Every replacement and additional repair is agreed with the client, with photos and measurements, before work starts.

    Deliverable: a findings report with photos and the final workscope.

  6. Repair and weekly reports

    Part repair and replacement, rotor balancing and module assembly. Every week the client receives a report in one standard format: work done, photos, deviations and decisions awaiting approval.

    Deliverable: weekly reports and minutes of meetings with the repair facility.

  7. Testing and acceptance

    Test-bed run at the facility to a programme aligned with manufacturer requirements, witnessed by our engineer and, if the client wishes, a client representative. The documents are checked before shipment.

    Deliverable: test report, work report and updated engine records.

  8. Installation and start-up at the station

    Delivery, installation, alignment and system connection, commissioning and start-up support, with monitoring during initial operation.

    Deliverable: commissioning certificate and final overhaul report.

Weekly report in one format

The report arrives every week on an agreed day, in the same format throughout the overhaul, so changes are easy to compare.

Minutes of meetings with the repair facility and the list of decisions awaiting your approval are attached.

Weekly report · gas generator overhaul
  1. Status by module 01–05 and key milestones
  2. Work completed this week, with photos
  3. Deviations from schedule and budget: causes and actions
  4. Decisions awaiting client approval
  5. Forecast return date and next week’s plan

What the client gets

Single point of responsibility

An EnergySystems project manager is accountable for schedule, budget and coordination with the repair facility.

    Approval before work

    Additional replacements and repairs go ahead only after your approval, based on photos and inspection data.

      Transparent schedule

      Every week you see the status, deviations and the forecast return date of the gas generator.

        Complete documentation

        Inspection findings, test reports, the work report and updated engine records.

          Overhaul in the workshop and at the station

          Acceptance, parts inspection and repair at the repair facility, installation and start-up at the station.

          EnergySystems engineers with repair-facility specialists in the workshop
          Parts inspection in the repair workshop
          Teardown area in the repair workshop: compressor casing parts
          Checking gas generator parts in the repair workshop
          RB211-24G DLE rotor and stator blades after cleaning
          Intermediate repair of an RB211-24G DLE gas generator rotor
          RB211-24G DLE gas generator after an intermediate repair
          RB211-24G DLE gas generator in the package enclosure, ready to start

          Equipment and experience

          Our core experience is RB211-24G DLE (SGT-A35) gas generators, including a 2024–2027 contract with Asia Gas Pipeline for the overhaul of nine RB211 gas generators. We also manage overhauls of RT62 power turbines, RFBB36 compressors and GE LM2500+ (PGT25+) drivers.

          Planning an overhaul?

          Send the serial number, operating hours and latest inspection report, and we will prepare a preliminary workscope and schedule.

          Discuss an overhaul