SCADA & supervisory systems
Process-data acquisition and visualisation, event histories, alerts and operator displays.
DIGITAL & CONTROLS
Digital solutions
Industrial automation, SCADA and system integration for process monitoring and equipment operations.
Digital integration services
Instrumentation & process control
Integration of instruments, controllers, engineering systems and equipment within a coordinated control architecture.
Data for maintenance
Equipment trends, event logs and technical information to support condition review and maintenance planning.
Our own turbine service and repair portal
ENERGYSYSTEMS / SERVICE MANAGEMENT
Developed by EnergySystems, our portal brings together turbine and equipment history, service and repair planning, defects, technical reports, documentation and team coordination. Used in the AGP (Asia Gas Pipeline) project, it can be adapted for any client’s equipment fleet, workflows, roles and reporting needs. Traceable activities and document control support applicable ISO requirements, OEM procedures and client requirements.
- Equipment history
- Maintenance & repair plans
- Defects & reporting
- Documents & role-based access
Digital twins and AI development
We are developing approaches to digital equipment models and AI-assisted analysis of operating data and technical reports. This is a development direction: the architecture and tools are selected for each client application.
How data supports an engineer
Explore the digital service concept: unit readings, deviation-detection logic, engineering review and links to station components.
Open demonstrationDemonstration using synthetic data
All readings, events and history below are illustrative. This is an interface concept with no plant connection or running AI model. It is not a proprietary production SCADA product or a record of client-facility performance.
INTERFACE CONCEPT
Equipment-data workflow example
DEMO-GCU-01 / Unit telemetry
Engineering review requiredSuction pressure50.2bar
Discharge pressure75.4bar
Gas flow3.80M Sm³/day
Shaft power18.2MW
Rotor speed5 120rpm
Unit load72%
Oil temperature72°C
Oil pressure3.5bar
Bearing temperature86°C
Casing vibration3.2mm/s RMS
Exhaust temperature486°C
Filter differential18kPa
Equipment trends
Interval · 24 minDigital asset record
DEMO-GCU-01Model · Telemetry · History
Lubrication
Open component in the 3D model ↗Temperature: 72 °C · Pressure: 3.5 bar
Linked event: oil temperature rise
ENGINEERING REVIEW LOGIC
Oil temperature rise at constant load
A rise of 18 °C at 72% load. Review the measurement, oil-cooler performance and maintenance history. An engineer confirms the cause.
Recommendation statusPending reviewAn engineer decides on the maintenance action
Events & maintenance
Event log| Time | Unit | Event | Action |
|---|---|---|---|
| 14:24 | DEMO-GCU-01 | Oil temperature +18 °C | Engineering review |
| 14:12 | DEMO-GCU-02 | Trend review complete | Continue monitoring |
| 14:00 | DEMO-GCU-03 | Unit on standby | Readiness check before start |
From a trend to a maintenance decision
Explore one example: lubrication-oil temperature rises while the unit load remains constant.
| Parameter | Baseline | Observed |
|---|---|---|
| Oil supply temperature | 54 °C | 72 °C |
| Unit load | 72% | 72% |
| Oil supply pressure | 3.6 bar | 3.5 bar |
Demonstration criterion: a rise of at least 15 °C from the example baseline. Actual limits are equipment-specific.
Digital asset record / DEMO-GCU-01
System: lubrication
Data: demonstration snapshots
Record: temperature deviation under review
View lubrication system ↗01 / SCADA parameters
Review the operating parameters
Two observations show oil supply temperature rising from 54 to 72 °C at a constant 72% load. Oil supply pressure changes from 3.6 to 3.5 bar.
- Compare the observation with its baseline
- Retain operating context and asset identification
The trend is linked to the lubrication system in the digital asset record.
COMPRESSOR STATION / SYSTEMS
Inside the compression package
RB211-24G DLE, RT62 power turbine and RFBB36 compressor. The package arrangement follows AGP Kazakhstan OEM references. Select a system to explore our scope of work.
Loading 3D model…
LAYOUT / COMPRESSION PACKAGERB211 + RT62 + RFBB36
Drag to orbit · Use + / − to zoom
01 / Our scope
Air intake & filtration
A wide external filter house feeds the elevated inlet duct and intake plenum. This is the turbine air path; transported gas stays in the separate compressor circuit.
- Filter-element selection and supply
- Intake, duct and support inspection
- Air-system installation and maintenance
Deliverable
Intake condition report and maintenance scope.
One compression package and its auxiliaries are shown. Spacing and detail are adapted for viewing; this is not an as-built station plot plan.
Tell us what your facility needs
Attach your specification, equipment questionnaire or asset list.